Yamaha SWR2311P-10G Managed L2 10G Ethernet (100/1000/10000) Power ove

Intelligent L2 switch with Dante optimization function and PoE power supplyThe "SWR2311P-10G" is an intelligent L2 switch that provides the ideal functionality for the "Dante" digital audio network that was developed by the Audinate Corporation and is now used world-wide. allowing construction of a stable network that simplifies settings. monitoring. management. and operation. When you connect the VXL1-16P to the SWR2311P-10G. optimal settings for Dante are made automatically via LLDP that is a protocol for passing system management data between a device and its neighboring device. PoE compliant ports can supply a maximum of 30W for all ports simultaneously. It can power not only PoE compliant devices such as the "MCP1" wall-mount controller used for controlling the volume of sound equipment used in conference rooms. or wireless access points. and can also provide ample power for driving even devices that require higher-output PoE such as the VXL1B-16P or VXL1W-16P.Complete Network OverviewUsing the dedicated "Yamaha LAN Monitor" software allows quick troubleshooting; you can check the PoE power supply status. turn the PoE power supply. and use the snapshot function to inform you whether a fault has occurred by detecting any difference in the state of the network since it was set up. The web GUI provides a full range of monitoring functionality. including dead/alive monitoring settings for PoE devices. allowing you to restart the PoE device if a fault occurs. or informing you via email of a fault.Snapshot Function Makes Troubleshooting EasyYou can take a “snapshot” of the network status when set up as required. The software can then automatically keep track of the settings and alert you to any changes. You could take a snapshot of the network. and then you would be alerted if a cable is disconnected. if a device is turned off. or if a wrong connection is made prior to the performance. for example.Enhanced Device ID with Icons. Labels and CommentsIdentifying devices connected to a switch by only their IP or MAC address is a difficult and error-prone approach. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info. such as the location of the device. in the Label and Comment fields.Intelligent Security ManagementAugmenting the VLAN functionality included in the SWR2311P-10G is built-in RADIUS server function. By setting up one switch as a RADIUS server and linking other switches to it. unauthorized network access can be effectively blocked for enhanced security. even in complex large-scale installations. Device authentication can be set up quickly and easily via a web-based GUI.