Intellinet Outdoor Vandalproof Gigabit High-Power PoE+ Injector. One 3

Outdoor Gigabit PoE+ Injector - 30 W for an IEEE 802.3at Powered DeviceThe Intellinet Network Solutions Outdoor Vandalproof Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant wireless access point. IP phone. network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This injector has an output power rating up to 30 watts. which is enough for many power-hungry PoE devices.Hardened design for outdoor and industrial useThis PoE+ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating. vast operating temperature range of -40 - 75°C (-4 - 140°F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that. it has ratings for shock (IEC 60068-2-27). freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6).Reduced wiring costsThere's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the Injector through its two-pin terminal block. simply connect this PoE+ Injector to the LAN switch port. and use the existing Cat5/6/6a cabling to deliver DC power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.) away.Safe protection for your expensive network equipmentThe auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND). current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.Wall-mount optionFor full installation flexibility indoors or outdoors. you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package.