Stormoprene Hypalon 2-Part Contact Adhesive 5 Litres - Clear

Stormoprene Hypalon Adhesive is a specially formulated 2part polychloroprene based adhesive system for high performance bonding of Hypalon and other natural and synthetic rubber surfaces that require high strength bonds for use in demanding applications. Formulated for use in the manufacture and repair of RIBs, inflatable boats, liferafts, diving suits, wet suits and other marine and industrial applications that specify resistance to salt water, oil, fuels etc. Easy to mix two part system supplied with Activator agent. Easy to apply by brush or roller. Contact bonds in 10 to 15 minutes, full cure 48 hours. Shelf life 3 to 12 months unopened tin, mixed adhesive has pot life of 3 to 4 hours. You can use just the glue (as a single component glue) on many fabrics, but the activator must be mixed with the adhesive when used to stick Hypalon fabric. Securely bonds Hypalon developed specifically for bonding Hypalon Hypalon is ideal for creating marine products because it is hardwearing, yet flexible. It is also resistant to chemicals, extreme temperatures and ultraviolet light. However, these properties also make it difficult to bond. Stormoprene (A3703) ensures a strong bond because it has been developed to take into account the unique properties of Hypalon. Withstands extreme environmental conditions heat, chemical and water resistant Many Hypalon products are subject to wear and tear boats, marine fenders and dracone barges are subject to harsh treatment when in unsettled waters, whilst wet suits are placed in and out of sea water and left to dry in the sun. Most adhesives could not withstand such extreme conditions. Stormoprene (A3703) ensures a safe and secure bond in these conditions because it has a temperature resistance of minus 30C to 120C and is resistant to both sea water and chemicals.