Floor Fixing Cleat For Benchura Changing Room Benches

Floor fixing bracket welded to base of each leg with hole for securing benches to the changing room floor Our Club range Mezzo Solo and Duo Cloakroom bench seats come as standard with plastic caps as feet to enable the benches to be moved around when needed (except the Club Mono bench). These floor fixing cleats are welded to the base of the bench leg and enables the benches to be fixed securely to the floor which is ideal for use in schools or other changing areas that you would prefer the benches to not be able to be moved. Four RFFC floor cleats are required for changing room benches measuring 1m 1.5m or 2m long but you will need six cleats for each 2.5m or 3m long bench as they have a set of middle legs for extra support. The floor cleats have rounded edges to look neat and in keeping with the seats modern looking round tube frameworks they have a 7mm hole to accept an M6 floor fixing or a No10 screw (not supplied) and are strong enough to be used in a variety of different industrial applications including commercial cloakroom areas and even on construction sites. Please Note: If you are fixing any cloakroom benches or lockers to the floors please make sure you check the room does not have underfloor heating first to avoid embarrassment (once bitten never forgotten)! Tip: Try applying silicone sealant underneath the floor cleat before fixing down to reduce the risk of water penetration should the floors be washed down. 4 required per 1 1.5m or 2m bench and 6 per 2.5 or 3m bench Must be ordered at same time as the bench as this is factory fitted option Colour to match the bench frame colour chosen Please note: Floor fixing bolts are not supplied with the cleats