Benchura Evolve Accessories - Floor Fixing Cleat for all benches

Welded to base of each leg with hole for securing benches to the changing room floor. Our Evolve range Mezzo Solo and Duo bench seats include plastic feet as standard to enable the benches to be moved around when needed (except the Evolve Mono bench). This floor fixing foot / cleat option is factory welded to the base of the square leg and enables the bench to be fixed to the floor securely which is ideal for schools or other changing areas / rooms that you would prefer the bench to not be able to be moved around in. Four FFC floor feet / cleats required for 1m 1.5m or 2m long benches but you need six for 2.5m or 3m long benches as they have an additional set of middle legs for extra strength. The feet / cleats have chamfered edges to look neat and they have a 7mm hole to accept a No10 screw or M6 floor fixing (not supplied) and are ideal for use in a variety of different commercial applications including school leisure centre sports and gym changing room areas and on construction sites. Please Note: If fixing changing room bench or locker to the floor please make sure you check there is not underfloor heating to avoid embarrassment (once bitten never forgotten)!It is worth applying silicone sealant to the underside of the floor cleat before screwing down to reduce the risk of water penetration if the floors are washed down. 4 required per 1m 1.5m or 2m bench and 6 per 2.5m or 3m bench Must be ordered at same time as the benches Colours to match bench colour chosen Please note: Floor fixing bolts are not supplied with the cleats