Ash Backrest for 1.5m Club Solo Bench (factory fit)

Ash Hardwood back support with rounded edges for location between the bench uprights. Ash hardwood back rests for our Club range Cloakroom bench seats are ideal for use in schools gyms and other changing areas where you need additional comfort or support when leaning back on the seat. For example if the bench is situated away from a wall or is in front of a window or area that you do not want people to lean on. These back supports simply bolt into the brackets on the round frame uprights of the RS10 RS15 RS20 RS25 or RS30 400mm deep freestanding solo changing room benches suit all complete with coat hooks. The support sits 250mm above the seat (other heights available on request) and the 2.5m and 3m benches have 3 sets of leg and therefore the corresponding back rests are supplied in two pieces to fit each side of the middle upright. The seats and backs of these units are strong enough to be used in a variety of different commercial spaces including industrial cloakroom areas and even on construction sites. It must be noted - the back rests can only be ordered at the same time as the corresponding bench as the fixing brackets need to be welded onto the 45mm round uprights. For use with: Club freestanding solo changing room benches 250mm above seat height providing support when leaning back on the bench Must be ordered at same time as bench as this is a factory fitted option Order in 500mm increments 1m long to a maximum length of 3m Simply bolts into brackets on the uprights Made in the UK Five year guarantee