max. shelf load 100 kg, WxD 1520 x 360 mm, max. shelf load 100 kg, WxD 1520 x 360 mm, standard shelf unit, height 1370 mm, 4 shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1520 x 360 mm, standard shelf unit, height 1370 mm, 4 shelves. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit height = 1370 mm. Width = 1520 mm. Depth = 360 mm. Shelf width = 1520 mm. Shelf depth = 360 mm. Max. bay load = 1500 kg. Max. shelf load = 100 kg. Number of shelves = 4 pcs. Material = steel wire, chrome plated. Colour = silver. Product type = modular boltless shelving units. Customs tariff number = 94032080. Country of origin = CHN. Gross weight = 25.28 kg. Weight = 22.08 kg. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories). The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, Ø 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps). This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.