height 2280 mm, single sided, height 2280 mm, single sided, shelf WxD 1000 x 300 mm, extension shelf unit

Boltless shelving units for files and archives, zinc plated, height 2280 mm, single sided, shelf WxD 1000 x 300 mm, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit height = 2280 mm. Shelf width = 1000 mm. Shelf depth = 300 mm. Colour = zinc plated. Width = 1010 mm. Depth = 320 mm. Shelf height adjustment increments = 30 mm. Max. bay load = 2500 kg. Max. shelf load = 80 kg. Number of shelves = 6 pcs. Shelf unit design = single sided. Product type = boltless archive shelving units. Customs tariff number = 94032080. Country of origin = DEU. Gross weight = 21.2 kg. Weight = 19.7 kg. Raised shelf panel edges prevent files from falling out at the sides. Shelf adjustment grid 30 mm. All edges are bevelled, no risk of injury. Zinc plated surfaces. Designed to fit the dimensions of files perfectly. Shelf unit reinforcement Required in every standard shelf unit and in every second extension shelf unit: use supplied cross braces for single sided shelf units. External dimensions Standard shelf unit: shelf width + 50 mm, shelf depth + 20 mm. Extension shelf unit: shelf width + 10 mm, shelf depth + 20 mm. Shelf unit reinforcement Required in every standard shelf unit and in every 2nd extension shelf unit: use supplied cross braces for single sided shelf units and supplied stabilisers for double sided shelf units. Please note If the height of the shelf unit equals more than 5 times its depth, the unit must be secured against tipping with the included wall brackets (suitable for solid masonry walls, e.g. concrete, limestone). Important information Please contact us if the supplied wall brackets are NOT suitable for your walls, and please observe the included assembly and installation instructions. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.