Nilco Angel Clear Mould & Algae Remover 1L

Nilco Angel Clear Mould & Algae Remover contains a fast-acting, powerful fungicide designed to eliminate mould, algae, and fungus at the source and control re-growth for long-lasting results. The bleach-free formulation is suitable for use on internal & external walls, tiles, PVC and patios.  Directions for Use: Shake bottle and turn spray nozzle to 'ON' position.  Ensure surface is dry and free from debris, pets and people. Spray Angel Clear over the area to be treated and leave to work for a minimum of ten minutes. Turn spray nozzle to 'OFF' position. Wipe with a clean, damp cloth. Allow to dry thoroughly. Use regularly to prevent re-growth. Note: Avoid contact by pets and people with treated surfaces until dry. Do not apply in strong direct sunlight.   Statutory Conditions for use: For use only as a surface biocide. Apply 500ml of product per 2 square metres of surface. Wear suitable protective clothing (coveralls) and synthetic/PVC gloves when using. Do not breathe spray mist. Otherwise, wear respiratory protective equipment and eye protection (see HSE guidance booklet HS(G)53 "Respiratory protective equipment - a practical guide for users") Do not contaminate foodstuffs, eating utensils or food contact surfaces. Cover water storage tanks/bowls before application. This product and its container must be disposed of in a safe way. When using, do not eat, drink, or smoke. Unprotected persons and animals should be kept away from the treated area for 48 hours until surfaces are dry. Prevent any surface run-off from entering drains. Dangerous to fish and other aquatic life. Do not contaminate watercourses or ground. Avoid all contact with plant life. This product is approved under The Control of Pesticide Regulations 1986 (as amended) for use as directed. HSE 10877 use only in accordance with the directions stated above and on the product label.