Sealey Standard Freestanding Parts Cleaning Tank

The Sealey Freestanding Parts Cleaning Tank makes the awkward and grungy job of cleaning car and motorbike parts easy. This heavy duty one-piece tank with its triple-baked enamel finish has a fully sealed magnetic drive pump unit to make sure there is a constant re-circulated flow of cleaning fluid flowing through the cleaning tanks’ flexible metal nozzle and onto the piece for cleaning. The pump unit of the Standing Parts Cleaning Tank has a replaceable filter which can be changed for a new one in the event the old filter becomes clogged with grease and dirt. It also has a replaceable impeller that keeps the flow rate of the Sealey Freestanding Parts Cleaning Tank at an optimum. The lid of each Standing Parts Cleaning Tank from Sealey also has a self-latching fusible link hinge that will automatically snap shut in the event of a fire. With several models of the Sealey parts cleaning tanks available garages and mechanics alike can be assured that an efficient and less messy means of cleaning parts is available to slot into any given working environment without much fuss. The SM20 and the SM19 Standing Parts Cleaning Tanks from Sealey are freestanding cleaning tanks with a removable shelf and parts basket. In addition the SM20 has a turbo agitator which bubbles air through the chosen cleaning fluid to reduce soaking time and overcome the most stubborn of stains. The agitator requires an air supply and 230v electrical supply but the SM20 can be used if need be without it. Sealey SM19 Instructions Sealey SM19 Parts Diagram Sealey SM20 Instructions Sealey SM20 Parts Diagram One-piece tank with triple baked enamel finish and fully sealed magnetic drive pump unit Lid of tank fitted with fusible link hinge which automatically snaps lid shut in the event of a fire Fluid re-circulated through replaceable filter and directed onto workpiece through flexible metal delivery nozzle Supplied with removable shelf and small parts basket SM19 supplied with workshop stand while the SM20 also has turbo agitator which bubbles air through fluid to reduce presoaking time (requires air supply in addition to 230V electrical supply – can be used without agitator if desired) Tank dimensions (H x W x L): 260mm x 540mm x 810mm Pump output/hr: 200L Motor power: 25W Maximum working capacity: 50 litres Minimum working capacity: 40 litres Bench-top parts cleaning tanks are also available