EVERBUILD® Lumberjack® 5 Minute Polyurethane Wood Adhesive Gel – 310ml

Rapid-Setting, Waterproof PU Wood Adhesive for Interior & Exterior Applications. EVERBUILD® Lumberjack® 5 Minute Polyurethane Wood Adhesive Gel is a high-performance, thixotropic, gap-filling adhesive that sets hard in just 5 minutes. Designed for rapid assembly and production line applications, it offers exceptional bond strength to wood and most common building materials. Its waterproof formulation conforms to EN 204 D4 standards, making it suitable for both interior and exterior use.. Key Features & Benefits. Fast Setting: Sets hard in 5 minutes, significantly reducing clamping time compared to traditional PVA adhesives.. Exceptional Bond Strength: Bonds to wood, concrete, brick, stone, metal, and various plastics (including PVC).. Waterproof: Fully waterproof to EN 204 D4 classification, suitable for exterior applications.. Gap-Filling: Slight foaming action fills small gaps, enhancing overall bond strength.. Excellent Chemical Resistance: Resistant to a wide range of chemicals, ensuring durability in various environments.. Versatile Application: Ideal for equipment manufacture, furniture assembly, staircases, and more.. Ideal For. General wood jointing and construction. Window and door frame manufacture. Furniture manufacture. Construction of staircases and ladders. Insulation adhesive for foam, glass wool, and fibre boarding. Product Details. Colour: Transparent. Packaging: 310ml cartridge. Viscosity: 200,000 mPa·s (thixotropic gel). Density: 1.10 g/cm³. Coverage: Approximately 225–355 ml/m². Shelf Life: 12 months from date of manufacture in unopened containers. Storage Conditions: Store between +5°C and +25°C in original unopened containers. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. At least one surface must be porous. Roughen non-porous surfaces to provide a key for the adhesive.. Moistening: Slightly moisten one surface with a damp cloth to assist curing. Do not over-wet.. Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.. Bonding: Apply the adhesive to one surface and bring the two surfaces together immediately. Apply even pressure across the bond line.. Clamping: Clamp the bonded materials for at least 30 minutes to ensure a strong bond.. Limitations. Not suitable for polyethylene, polypropylene, Teflon, or nylon.. At least one surface must be porous for effective bonding.. Application temperature should be between +5°C and +30°C.. Wood moisture content should not exceed 30% w/w.. Setting times may be extended at low temperatures and low humidity.. Cleaning of Tools. Clean tools and excess adhesive immediately with acetone or white spirit. Cured adhesive must be removed mechanically.