Nitromors Rust Remover Jelly 5L

Nitromors Rust Remover Jelly is a high-performance, non-drip gel designed to simplify metal restoration by dissolving rust across a broad variety of metal surfaces. Its viscous formula clings to vertical and intricate areas without running, making it ideal for work on cars, bikes, tools, gates, and more. For smaller parts, simple immersion is possible. The rust is chemically converted to a uniform grey finish, ready for painting or treatment. Backed by Nitromors' long-standing legacy dating back to the 1930s, this jelly delivers dependable, effective rust removal with unmatched convenience. Directions for Use: 1. Remove loose flaking rust and dirt with a wire brush or cloth. 2. Using a brush or spatula, apply a sufficient layer (approx. 1-2 mm) of jelly to the rusted area. 3. Leave the gel on the surface for 15-20 minutes to fully react with the rust. 4. Wash off with clean water, ensuring all residues are removed and the surface is fully dry. 5. Once dry, the cleaned metal is ready for priming or painting and will adhere much better to coatings. For heavily rusted surfaces, you may let it sit longer or cover with plastic wrap to prevent drying out.