Replastering Paint - Biokil Crown

Microporous Matt Emulsion for Damp or Replastered Walls. Biokil Crown Replastering Paint is a breathable, non-vinyl matt emulsion specifically formulated for application on damp or newly replastered walls. It allows moisture to evaporate, preventing blistering and flaking, and more than fulfills the recommendations in BS6576. Ideal for use during the drying-out period following the installation of a damp proof course or after water damage.. Key Features & Benefits. Microporous Formulation: Allows moisture to escape, reducing the risk of blistering and flaking.. Non-Vinyl Composition: Ensures breathability, unlike high vinyl emulsions that can trap moisture.. BS6576 Compliant: Exceeds British Standard recommendations for treating rising damp.. Versatile Application: Suitable for damp walls, replastered surfaces, and areas affected by water damage.. Easy to Apply: Can be applied with a brush or roller; cleans up with water.. Product Details. Colour: White or Magnolia.. Finish: Matt.. Packaging: 5 Litre containers.. Coverage: Approximately 10 m² per litre, depending on substrate porosity.. Drying Time: Touch dry in 2–4 hours; recoatable after 16–24 hours.. Application Methods: Brush or roller.. Storage: Store above 5°C in sealed containers.. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from loose or flaking materials. Remove any efflorescent salts and neutralize with Biokil Crown Salt Neutraliser if necessary.. Cleaning: Clean the surface with Biokil Crown Surface Cleanser and allow to dry.. Repair: Address any surface defects and sand to a smooth finish. Remove any dust.. Application: Stir the paint thoroughly before use. Apply one or two coats using a brush or roller, depending on the desired finish and substrate porosity.. Drying: Allow to dry for 2–4 hours before handling; wait 16–24 hours before recoating.. Limitations. Do not apply over surfaces with active efflorescence; ensure efflorescence has ceased before painting.. Avoid application in conditions of high humidity or if the room temperature is below 5°C.. Ensure adequate ventilation during application and drying.. Cleaning of Tools. Clean all tools and equipment with water immediately after use, before the product dries.