Autotek Anti-Rust Grey Primer 300ml

Autotek Anti-Rust Grey Primer contains premium anti-corrosion properties which prevents rust from forming on metal surfaces. The zinc-based compound agents provide maximum protection, which contribute to a smooth and uniform finish, with minimal sanding required. Autotek’s ultra-fast drying formula ensures touch dryness in just 10-20 minutes. By using Autotek Anti-Rust Grey Primer, it helps to extend the life of the finishing coat, whilst ensuring high quality, consistent and professional results. Directions: 1. Shake aerosol well for approximately 2 minutes. 2. Spray from a distance of 15-25cm away from the surface to be treated. Spray aerosol upside down for 2-5 seconds after each application to prevent blockages from forming in the nozzle. 3. Build up with several thin coats, allowing 10-20 minute intervals between coats. Paint should be touch dry in 10-20 minutes. 4. Leave to fully cure for 24 hours. Note: Only use outdoors or in a well-ventilated area at temperatures between 15°C-25°C. Use only as directed.