EVERBUILD® Roof & Gutter Sealant – Black

Premium Butyl-Based Sealant for Roofing and Guttering Applications. EVERBUILD® Roof & Gutter Sealant is a high-quality, butyl-based sealant and adhesive designed to provide instant, permanent weatherproofing for a wide range of roofing applications. It adheres effectively to most common roofing materials, including bitumen, asphalt, felt, metals, and wood.. Key Features & Benefits. Weatherproof Performance: Provides immediate and reliable protection against water and harsh weather conditions.. Versatile Adhesion: Bonds effectively to common roofing materials, including bitumen, asphalt, felt, metals, and wood.. Flexible & Durable: Semi-drying formula remains permanently plastic beneath the surface skin, accommodating movement without cracking.. High Solids Formulation: Excellent gap-filling properties without shrinkage.. Application in Wet Conditions: Can be applied even under heavy rain.. Enhanced Adhesion: Incorporates polymer additives to improve adhesion.. Ideal For. Filling and sealing gaps/cracks in most roofing applications.. Bonding to concrete, roofing felt, lead, zinc, steel, and masonry.. Bedding tiles, slates, and flashing into position.. Joint sealing on gutters and downpipes.. Sticking down loose roofing felt.. Joint sealing between corrugated asbestos cement and iron sheeting.. Product Details. Chemical Base: Butyl-based.. Colour: Black.. Packaging: 295ml cartridge.. Density: Approximately 1.80g/cm³.. Service Temperature Range: -15°C to +75°C.. Application Temperature: +2°C to +40°C.. Coverage: Approximately 10.5 linear metres for a 6mm diameter bead.. Shelf Life: Use within 24 months from the date of manufacture.. Application Instructions. Ensure all surfaces are clean and free from dust, grease, and other contaminants.. Cut the tip of the cartridge, taking care not to damage the thread.. Cut the nozzle at a 45° angle to the desired bead size and screw onto the cartridge.. Apply using a standard sealant gun. For lap joints, apply sufficient sealant to bridge the gap and press surfaces together while still tacky, leaving a minimum 2mm sealant film.. Limitations. Do not use on glass or white PVCu.. Not suitable for internal use.. The product will always remain tacky to the touch; avoid applications where physical surface contact is likely.. Do not use in constant water immersion.. Cleaning of Tools. Clean tools with turps or white spirits immediately after use.