Tetrion Woodfil Natural/Pine 330g

Tetrion Ready Mixed Woodfiller Paint or stain Sandable Drillable Carveable Quick Dry Tetrion Ready Mixed Woodfiller is our convenient, ready to use woodfiller, with no mixing or dosing required. Tetrion Ready Mixed Woodfiller is designed for use in Interior and Exterior repair jobs and is suitable for filling gaps, cracks and holes in most wooden surfaces. Tetrion Ready Mixed Woodfiller is: Suitable for Interior and Exterior repair jobs Versatile- suitable for most types of wood and can be shaped or cut Ready mixed for quick repair jobs Super Smooth Flexible with excellent, strong adhesion qualities Easy to sand High strength polymer re-enforcement Over-coatable with varnish, stain and most oil based paints Directions for use: Make sure the surface is dry and free from dirt, grease and any loose material. Lightly sand in direction of grain, removing any decayed wood down to dry, sound materials. Work tube between fingers. Apply with a filler spreader, pressing the filler firmly into the repair. Smooth over with a wet spreader prior to drying. Deep repairs should be built up in layers of no more than 10mm, ensuring that each layer is dry before the next layer is applied. Finish with a stain or varnish. Over paint with an oil based paint or varnish when used externally. Prime with a suitable sealer when overpainting with a water-based paint. After Use Replace cap to ensure remaining filler stays in good condition. Advice Filler may stain/varnish differently to surrounding wood, use on an inconspicuous area first to check results. Seal surface after application. Do not use in damp or wet conditions, if rain or moisture is expected cover repair until filler has fully set. Important Do not use in wet or damp conditions or use on surfaces regularly underwater. Do not sandwich between layers of paint and/or sealants.