Boxwall Flood Barrier Inward Section - 530H x 540/210W x 680D mm

Quick and easy to install reusable and stackable for easy storage Boxwall is a freestanding flood water barrier designed for protecting domestic and commercial properties roads streets carparks river banks and canals which are threatened. The walls are lightweight each weighing only 3.5kg and are stackable - 26 straight sections can be stored on a standard pallet. Install the wall on a hard flat even surface and install left to right. It's possible to create an unlimited wall length If the space you have allows adjust the angle of your wall by moving the locking system around plus or minus 3 degrees just 3 x curved sections are needed to create a 90 degree bend. No tools or fastenings are required as the modular components just slot together. Rubber guards support on the bottom on the modular section that prevents water seeping through from underneath. The wall is anchored down by the weight of the flood water even if the flood water was to reach the top of the Boxwell it would remain extremely stable the higher the water level the stronger the retaining effect. Reusable over many flood threats and lasts up to 20 years. If flooding occurs in a public it's a good idea to place some flood warning roads signs nearby to help road users avoid the area. Freestanding flood barrier that can be reused Made from Acrylonitrile Butadiene Styrene (ABS) a strong impact resistant plastic Modular units slot together with no need for tools Tough but lightweight so easy to stack store and transport Temperature resistance -30° to +90°C Standard pallet would store 26 straight sections Extendable to an unlimited length Quick and easy to deploy in an emergency Install from left to right 3 x curved sections are needed to create a 90 degree bend Suitable for use on any hard flat even surface Anchored down by the weight of flood water Rubber underneath to prevent water seeping under