Sealey Polyethylene Barrel Bund - 1380 x 1290 x 280mm

Barrel bunds are used to stand drums on allowing them to collect any drips or leaks from the barrels and hold it until it can be properly disposed of. Due to the materials in these bunds they are resistant to most chemicals and are suitable for life outside. We also offer a range of spill kits & absorbents perfect for use in conjunction with drum bunds. And if you're looking for a solution to storing and dispensing oil also part of the range of Sealey spill containment products is the Drum Rack Storage and Dispensing Unit which would be worth a look. The Control of Pollution (Oil Storage) (England) Regulations 2001 3. Requirements for storage of oil - general (1) Oil shall be stored in a container which is of sufficient strength and structural integrity to ensure that it is unlikely to burst or leak in its ordinary use. (2) The container must be situated within a secondary system which satisfies the following requirements - (a) subject to paragraph (5) it must have a capacity of not less than 110% of the container’s storage capacity or if there is more than one container within the system of not less than 110% of the largest container’s storage capacity or 25% of their aggregate storage capacity whichever is the greater; Two or four drum option Corrosion resistant will not leak or rust Made from polyethylene Suitable for storing aggressive chemicals Forklift pockets allow unit to be moved with a forklift