Holley Easy Level Universal Floatless Fuel Level Sender

Easy level from Holley is a universal fuel level sender unit like no other. Unlike traditional senders which use a float or dip tube, Easy Level uses a laser to measure the height of the fuel level in the tank. This makes it easy to calibrate for any tank as all you need to do is program the depth of the tank. The sender fits to a universal SAE 5 bolt flange as used in many OEM fuel tanks and requires a simple 3 wire installation (12v power, ground and gauge connection).Works with any fuel tank from 4" (102mm) to 38" (965mm) deepUnique laser fuel level sensing, no floats or dip tubeCommon SAE 5 bolt tank mounting (5 x 54mm PCD)Easy 3 wire connectionCompatible with virtually all aftermarket fuel level gaugesHolley Easy Level is the ideal sender unit for custom builds or where an aftermarket fuel level gauge has been installed. The laser level sensing means you no longer have to match the sender to the tank depth as Easy Level works with any tank from 102mm to 965mm depth. Calibration is simple with just the tank depth needed to set up the Easy Level and electrical connection is equally as simple with just a 12v feed, ground and gauge connection. Easy Level also features a set of dip switches which allows the sensitivity to fuel slosh to be adjusted so you don't get any annoying gauge needle movements when cornering or braking and because there are no moving parts to fail Easy Level will provide years of trouble free operation.Easy level provides a PWM signal which is compatible with most aftermarket fuel level gauges. It is not compatible with OEM type gauges which use an Ohm only input. Supplied with a rubber sealing gasket and mounting hardware.