Davies Craig EWP140 Alloy Electric Water Pump - Without Installation Kit (Pump Only)

The EWP140 electric water pump from Davies Craig and has been designed as a high capacity upgrade for the original EWP80 pump. Constructed using a robust aluminium alloy body which is powder coated for a long lasting corrosion free finish. The inlet and outlet bolt to flanges on the pump and the kit is supplied with straight and 90 degree fittings to allow for multiple fitting orientations (only on option which includes fitting kit).The EWP140 pump flows 140 litres per minute making it suitable for large capacity engines (3.5 to 5.0 litre) or high revving / high power output competition engines.The benefits of fitting a Davies Craig EWP over an existing mechanical pump are - Coolant is circulated after engine shutdown preventing hot spots Increased engine power and torque Better control of engine temperature Increased cooling capacity Improved fuel economy Increased engine life Radiator size and coolant capacity can be reduced saving weight Increase in maximum engine speedDavies Craig EWP140 pump can be fitted as a stand alone item, however to obtain the full benefits it is recommended that it is used with a digital controller which gives you full control over the engine running temperature.Available as the pump on its own or with an installation kit including 1x straight flange adaptor for 38mm bore hose, 1x 90° flange adaptor for 38mm bore hose, 12x flange adaptor bolts, 1x wiring harness, 1x relay and 2x hose clips. Adaptors for larger bore hose up to 50mm are available separately.