Tallas D-DWP 1000 Sewage Pump

The Tallas D-DWP 1000 is a 2-in-1 submersible pump suited for both waste water and clean water. The pump is both suitable for occasional use or for fixed placement in a basement, well or other area where clean or waste water must be automatically removed. The pump is very compact and can therefore be placed in small spaces (approx. 28 cm). The Tallas D-DWP 1000 allows you to adjust the culvert on the pump grid. As a result, you can use the pump for just clean water or a combination of clean and waste water. Adjusting the culvert affects the remaining water level once the pump shuts down. The smaller the culvert on the pump grid, the less remaining water in the room. You can set the pump to automatically turn on at different water levels. The separate float cable can be attached at two places on the pump, allowing you to easily determine the level at which the pump powers on. * The pump outlet is 1.25". * The maximum submersion depth of the pump is 7 metres. * The maximum head rate is