FloPlast Industrial/ Xtraflo Gutter Running Outlet - for 110mm Downpipe 170mm White

A Running Outlet is the fitting which connects the guttering to the downpipe.Essentially a tee piece, running outlets can be used at either the centre or the end of the run of gutter. If the outlet is installed at the end then a short piece of gutter with an external stopend attached is used to extend the gutter past the end of the brickwork to catch any rainfall from the overhanging tiles.The outlet has moulded screwholes to enable it to be fixed back to the fascia board. The downpipe connection is a simple push fit onto our robust 110mm round downpipe.We recommend the use of SL40 silicon spray on all seals when installing our XtraFlo Industrial gutter.