Wilko 32mm Chromed Brass Flip Top Basin Waste Flip

Get that plumbing job done in no time with our quality chromed brass sink and basin waste. Essential for both DIY and professional plumbers, the slotted sink or basin waste 32mm is an ideal replacement in chromed brass to match your other fittings. Easy to fit, the sink and basin waste resists corrosion for lasting use. Directions for use: Ensure the taps are fully closed. Disconnect existing pipe work connected to the old waste body. Note: Take care against any potential water spillage on removal. Ensure one of the washers (B) is over the threaded area and pushed to the top of the waste. Position the waste body (A) in the outlet hole of the sink/ basin, seating it on a bed of silicone sealant for a good seal. Ensure that the overflow slots in the waste body face the integral sink/ basin overflow slots. Underneath the sink/ basin, place the remaining washer (B) with silicone sealant applied to both faces and screw backing nut (C) on waste body and firmly hand-tighten. On ceramic sink/ basins take care not to over-tighten to avoid cracking the sink/ basin. Reconnect pipe work to the newly fitted waste body. Allow sufficient time for the silicone to cure and check for leaks.