Catchpit Chamber Set - 300mm Diameter x 1025mm Height For 110mm andamp; 160mm Pipe

This catchpit chamber has a diameter of 300mm and is 1025mm deep. It features a main channel of 110mm and an additional two 110mm inlets at 90 degrees.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.NOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our PVC-u or polypropylene manhole covers.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 110mm inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.