Electrical Service Duct for 1200mm wide BA/BC/BQ Workbenches

Bench mounted service duct for BQ square tube workbenches BC cantilever workbenches & BA manual height adjustable workbenches. A variety of workbenches are used in industrial units and other commercial premises. Electrical service ducts are optional accessories designed to increase the functionality of the workbenches. The service ducts are manufactured to fit as an optional accessory for several types of workbenches; for example BC cantilever workbenches BQ square frame benches and BA height adjustable benches. However these service ducts are not compatible with extension benches. The optional ducts have two twin-switched 13amp sockets and are pierced for ELCB. The sockets are unwired and hence eliminate the necessity for extension leads running to the workbench. This enables a hassle free working environment near the workbench. The service ducts are accessories that can be mounted directly onto the bench top with the minimum of effort. They are simple to attach to the benches; the only additional requirement being service duct insulating strip. The insulating strip ensures the correct functioning of the service duct and so it must be purchased as a means of attaching the surface duct to the workbench. Compatible accessories Data points RCB Circuit Breaker Complete with 2-twin switched 13 amp sockets (unwired) and pierced for ELCB Does away with extension leads etc running to the bench Sockets are unwired so the correct length of cable can be used to reach a power point in a single length from the most suitable side of the duct and optional RCD circuit breakers can be connected simultaneously you will need to supply appropriate 13 amp earthed cabling You will also need to purchase a Service Duct Insultating Strip which is sold separately