Cable for Industrial Electric Fan Heaters - 2 metres long

30kW industrial fan space heater with two heat settings and fan only option During the winter months workshops and other industrial environments can become cold help to prevent accidents and illnesses with one of our industrial fan heaters. This heater is the largest in the range at 30kW max power with two heat settings a thermostat and a fan only setting you can adjust this heater to any reasonable temperature you want. These industrial fan heaters produce a dry heat with absolutely no condensation gases fumes or smells. Control the temperature with the adjustable thermostat once the optimum room temperature has been reached the thermostat can be slowly turned counter clockwise until the dial clicks this sets the temperature and will result in the unit maintaining the current room temperature. A built in auto cooling system helps to prevent the unit from overheating. The fan heater has a thermal cut out where if the front grille reaches 45oC will cut off the heating elements until the fan has cooled the unit to 40oC. This heater is supplied with a three phase chassis mounted 5-pin connector (cable required - sold separately). These heaters really do pack a punch when it comes to warming your cockles but if you feel 30kW is a bit more than you need there is a space heater with 15kW output available in the same quality range of ESE heaters. Electric industrial fan heater 30kW with 2 heat settings and fan only option 110-120000 Output Btu/hr Requires 3 phase supply Thermostat allows temperature to be controlled and the heater is capable of heating an area up to 24000ft3 Built in auto cooling system prevents the unit from overheating Produces a totally dry heat which means no condensation no gases no fumes so no smells Two wheels that allow the unit to be moved and re-positioned when needed Power supply: 415V/3ph - 63A supplied with three phase chassis mounted 5-pin connector (cable required).