UNIOR Torque wrench 1/2'' 60-340 Nm

60-340 NM 1/2" Product attributes: Accuracy: +/- 3% micrometric scale for easy and accurate setting torque setting protection QUICK SETTING - only eight turns to cover the entire scale Application: double-sided, but usually in the direction marked on the key handle handle: bi-composite material dual scale in lbf.ft and Nm A convenient hanger makes it easy to store the tool and also helps with unlocking and setting the desired torque. working angle 5° Guarantee 1 year warranty Important ! Do not use a torque wrench for unscrewing! Tighten only in the direction indicated on the sticker on the wrench! The sticker indicates the correct tightening direction! Key calibration is required every 12 months or after every 5,000 uses from the date of purchase. After finishing work, ALWAYS loosen the spring by setting the tensioner mechanism to the starting position. Once the set torque is reached, please do not tighten any further. If we do not follow the rules indicated in the operating instructions, we may damage the torque wrench. GPRS: User manual Safety tips: Only an authorized person at a certified service center may perform technical maintenance. Tools should always be serviced and calibrated by a certified service engineer. The tool should only be used for precision tightening as specified in the instruction manual. Check your user manual to learn how to properly read the scale values on your tool. Stop tightening when you hear feedback from the tool. Only use sockets with the same square drive. Always set the scale back to 0 after use and before storage. Do not store a tool that is dusty and not cleaned after use. Always check that the tool has a valid certificate and always follow the calibration interval specified in the tool's instruction manual. When applying torque, always apply it with even and consistent pressure. The torque wrench must always be stored in its original packaging when not in use.