Trend Large Lock Jig

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Suitable for DDA (Disabilty Discrimination Act) lock size. 20mm x 235mm radius end face plate, 24mm x 235mm radius end face plate and 17mm x 170mm mortise. Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG). Suitable for doors 34mm to 58mm thick. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Suits DIN style locks. Contents: 1 x Guide bush collar 2 x Face plate template 1 x Mortise template 1 x Template adapter 6 x Spacer Fingers