Tetrion Fine Surface Filler Tube 330g

Tetrion Fine Surface Filler- Super Smooth & Extra Fine. Suitable for Hairline Cracks. Sandable Paintable Spreadable Non-Shrinking Tetrion Fine Surface Ready Mixed Filler is designed to fill hairline cracks, wood grain and chips in paintwork. Tetrion Fine Surface Filler: Super smooth buttery filler For very fine cracks and interior blemishes Convenient for quick repair jobs- No dosing or mixing required Water based non-shrink paste Rapid sanding High strength polymer re-enforced Over-paintable Directions for Use Ensure all surfaces are dry clean and free from dust, grease and other contaminants. Sand down gloss surfaces to create a key-able base. Apply a thin layer of no more than 2mm wide with a filler spreader, pressing well into the area to be filled. Smooth off immediately with a wet spreader. If necessary, Tetrion Fine Surface Ready Mixed Filler can be easily sanded down after approximately 30 minutes and then overpainted with most household paints. Overpaint with an oil-based paint when using externally. After Use Replace cap to ensure filler stays in good condition. Store away from frost. Advice Tetrion Fine Surface Ready Mixed Filler should be applied in layers of no more than 2mm. If the depth of the fill is greater than this a different filler from our range, such as Tetrion Wood Filler, Tetrion Smart Filler or Tetrion All Purpose Filler, should be used.