B-SAFETY with safety eye shower and collection basin, for wall mounting, with safety eye shower and collection basin, for wall mounting, stainless steel

PremiumLine emergency shower combination, with safety eye shower and collection basin, for wall mounting, stainless steel. Supplied = flat pack. Max. pressure up to = 3 bar. Thread = 3/4 inch. Height = 1625 mm. Depth = 625 mm. Colour = stainless steel. Material = stainless steel. Type of mounting = wall mounting. Min. pressure = 1.5 bar. Product type = emergency showers. Customs tariff number = 84818099. Country of origin = DEU. Gross weight = 10.7 kg. Weight = 9.8 kg. Sustainability = Recyclable. High-performance shower head for a limited, even and soft jet of water. Optimised for rinsing chemicals off the skin. Robust and corrosion-resistant construction made of stainless steel. Self-emptying, largely limescale- and maintenance-free. The B-SAFETY emergency shower combinations - combinations of body emergency showers and eye showers - are more space-saving compared to individual installation. This creates the opportunity to establish a central point for first aid. The possible combination with a hand-held eye shower or hand-held shower also gives an injured person the option to treat minor injuries partially, without having to use the body emergency shower immediately. The B-SAFETY body emergency showers of the PremiumLine series are manufactured from stainless steel and are just as suitable for use in laboratories and research as for harsh use in industry. The polished stainless steel surface is not only resistant to many chemicals but also offers a modern design for laboratories and cleanrooms. The body emergency showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and DIN EN 15154 but is also self-draining, largely free from calcification and maintenance-free, as well as very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimised for rinsing chemicals off the skin. The B-SAFETY emergency shower is identified with the enclosed safety sign according to DIN EN ISO 7010 and ASR A1.3, and visibility is improved. The recognition distance is 15 metres. - Integrated PremiumLine safety eye shower with a stainless steel bowl, 275 mm diameter, polished, 1 1/4-inch male drain connection, mounting height 810 mm (±100 mm) - Two wide-spraying high-performance spray heads made of stainless steel, polished, with a plastic spray plate, low-calcification, including rubber protectors and tight-fitting dust caps with a flip-open mechanism, mounted via a distributor fork - Wall flange with 4 mounting holes, made of stainless steel, polished, 3/4-inch female water inlet - 3/4-inch ball valve made of stainless steel, with a quick-mount system and pull-rod activation, pull rod with ring handle made of stainless steel, polished, length 700 mm - 3/4-inch wall-mounted shower arm made of stainless steel, polished, projection 630 mm - Connecting piece made of stainless steel, for quick on-site assembly and easy alignment of the shower arm - Connecting pipe made of stainless steel for easy assembly and alignment of the shower, polished - Two 3/4-inch connecting pipes made of stainless steel, polished, total length 1500 mm - Including upper and lower 3/4-inch female water inlets for installation in circulation pipes, 3/4-inch plug made of stainless steel - 1/2-inch ball valve made of stainless steel, with PUSH-lever operation, actuator plate made of stainless steel, polished, length 240 mm, with large PUSH signal, photoluminescent according to DIN 67510 - Integrated automatic flow regulator 50 litres/minute for a compliant spray pattern within a specified working range of 1.5 to 3 bar flow pressure - According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717, ANSI Z358.1-2014, DIN EN 15154-1:2006, DIN EN 15154-2:2006 and DIN EN 15154-5:2019. DIN-DVGW tested and certified.