B-SAFETY with eye/face shower, wash basin, cover, for wall mounting, with eye/face shower, wash basin, cover, for wall mounting, stainless steel

PremiumLine emergency shower combination, with eye/face shower, wash basin, cover, for wall mounting, stainless steel. Supplied = flat pack. Max. pressure up to = 3 bar. Thread = 3/4 inch. Height = 1625 mm. Depth = 625 mm. Colour = stainless steel. Material = stainless steel. Type of mounting = wall mounting. Min. pressure = 1.5 bar. Product type = emergency showers. Customs tariff number = 84818099. Country of origin = DEU. Gross weight = 11.8 kg. Weight = 10.9 kg. Sustainability = Recyclable. High-output shower head for a limited, steady and soft jet of water. Optimised for rinsing chemicals off the skin. Robust and corrosion-resistant stainless steel construction. Self emptying, largely limescale-free and maintenance free. The B-SAFETY emergency shower combinations - combinations of body safety showers and eye washes - are more space-saving compared to individual installation. This creates the opportunity to establish a central station for first aid. The possible combination with a hand-held eye wash or hand shower also gives an injured person the option to treat minor injuries locally without having to use the body safety shower immediately. The B-SAFETY body safety showers of the PremiumLine series are manufactured from stainless steel and are just as suitable for use in laboratories and research as they are for harsh use in industry. The polished stainless steel surface is not only resistant to many chemicals but also offers a modern design for laboratories and cleanrooms. The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and DIN EN 15154, but is also self-draining, largely free from calcification and maintenance-free, as well as being very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimised for rinsing chemicals off the skin. With the enclosed safety sign according to DIN EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is identified and its visibility is improved. The recognition distance is 15 metres. - Integrated PremiumLine eye/face wash with bowl and cover, for wall mounting, mounting height 810 mm (±100 mm) - Wall flange with 4 mounting holes made of stainless steel, polished, 3/4-inch female water inlet - Housing, cover and collection bowl made of impact-resistant and UV-resistant ABS plastic, 1 1/2-inch male drain connection, 3/8-inch ball valve made of brass, with lever operation via hinged protective cover, activated by swivelling the cover down - 3/4-inch ball valve made of stainless steel, with quick-connect system and pull rod actuation, pull rod with ring handle made of stainless steel, polished, length 700 mm - 3/4-inch wall-mounted shower arm made of stainless steel, polished, projection 630 mm - Connecting piece made of stainless steel, for quick on-site assembly and easy alignment of the shower arm - Two 3/4-inch connecting pipes made of stainless steel, polished, total length 1500 mm - Flow regulator made of brass with a very limited spray pattern, chrome-plated - Including upper and lower 3/4-inch female water inlet for installation in circulation pipes, 3/4-inch plug made of stainless steel - With integrated 3/8-inch flow control valve for adjusting the desired spray height and flow rate - Integrated automatic flow regulator 50 litres/minute for a standard-compliant spray pattern within a specified operating range of 1.5 to 3 bar flow pressure - In accordance with BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717. In accordance with ANSI Z358.1-2014, DIN EN 15154-1:2006, DIN EN 15154-2:2006 and DIN EN 15154-5:2019. DIN-DVGW tested and certified