Woodzone Insecticide - Eradication and Prevention of Wood-Boring Insects

Ready-to-Use Treatment for the Eradication and Prevention of Wood-Boring Insects. Woodzone Insecticide is a high-performance, ready-to-use wood treatment formulated to eliminate infestations of wood-boring insects such as woodworm, furniture beetle, and other common timber pests. Designed for professional and DIY use, it penetrates deeply into timber to provide long-lasting protection and prevents future infestations. Ideal for use on roof timbers, floorboards, joists, and wooden structures in both domestic and commercial properties.. Key Features & Benefits. Effective Insect Control: Kills active wood-boring insects including woodworm and prevents reinfestation.. Deep Penetration: Soaks into timber to ensure lasting protection of the entire treated area.. Ready to Use: Supplied in a convenient liquid form — no mixing or dilution required.. Low Odour Formula: User-friendly and suitable for indoor use with minimal disruption.. Suitable for Most Timbers: Can be applied to softwoods and hardwoods in structural and decorative use.. Product Details. Formulation: Water-based insecticidal wood preservative. Application: Brush, roller, or low-pressure spray. Coverage: Approx. 5–8 m² per litre depending on timber porosity. Drying Time: Touch dry in 1–2 hours, fully dry in 24 hours. Use Areas: Roof spaces, floor voids, structural timbers, and joinery. Application Instructions. Preparation: Ensure timber is clean, dry, and free from coatings or surface contaminants.. Apply Evenly: Use a brush or spray to apply generously, allowing the product to soak into the surface.. Second Coat (if required): Apply a second coat after the first has absorbed fully for increased protection.. Allow to Dry: Ensure treated areas are fully dry before redecoration or reinstatement.. Limitations. Do not apply to damp timber or use in conditions below 5°C.. Not suitable for use on timber in direct contact with food or animal housing.. Health & Safety. Use in well-ventilated areas and avoid skin and eye contact. Wear appropriate PPE including gloves and safety glasses. Refer to the Safety Data Sheet (SDS) for full safety information before use.