Impact sprinkler ground peg

An impact sprinkler cannot operate efficiently without a stand or a ground peg. Simply ensure that the ground peg (made of galvanised steel) is stuck securely in the ground and then connect the impact sprinkler to it. Sizes * Inlet size: (side): ¾" (female thread) * Outlet size (top): ½" (female thread) To use the ground peg the right way: The following extra couplings are needed (not standard included): * Reducing nipple from ½" to ¾" (https://www.waterpump.co.uk/double-nipple-from-1-2-to-3-4) * Gardena-type tap connector: 26.5 mm (¾") (female thread) (https://www.waterpump.co.uk/gardena-type-tap-connector-26-5-mm-3-4-female-thread) These coupling pieces allow you to connect both the impact sprinkler and the garden hose directly to the ground peg.  The Gardena-type tap connector can be used instead of the hose socket that is fitted on the side of the ground peg. Simply unscrew the hose socket and then screw the Gardena-type tap connector to the ground peg.