Tetrion Ready Mix Filler 2kg

Tetrion All Purpose Ready Mixed Filler is our most versatile ready mixed filler. Suitable for Interior and Exterior repairs, Tetrion All Purpose Ready Mixed Filler seals and fills most household materials including plaster, wood, stone, concrete, brickwork and metal. Tetrion All Purpose Ready Mixed Filler is: Water and Weather Resistant Drillable and Tappable Resistant to vibration, shrinking, sagging and cracking Resilient to Expansion and contraction Highly Versatile- suitable for multiple surface applications Ready mixed for convenience for quick repair jobs- No dosing or mixing required Super Smooth Easy and quick to sand High strength polymer re-enforced Over-paintable Directions for use Ensure all surfaces are dry, clean and free from loose materials. Work the tube with fingers before use. Cut the nozzle to the required size. Apply with a filler spreader and smooth off immediately with a wet spreader. Setting occurs in approximately 4-6 hours depending on depth of fill and atmospheric conditions. After 24 hours filler can be sanded and then overpainted with most household paints. Over paint with an oil-based paint when used externally. Prime with a suitable sealer when overpainting with a water-based paint. After Use Replace plastic disc and lid to ensure remaining filler stays in good condition. Advice Tetrion All Purpose Ready Mixed Filler should be applied in layers of no less than 3mm and no greater than 10mm to ensure adhesion. Tetrion All Purpose Ready Mixed Filler can be drilled or tapped provided that the depth of the set filler is at least equal to that of the screw/plug. Under long term storage, product may separate slightly. If this is the case stir before use. Important Do not use in wet or damp conditions or use on surfaces regularly underwater. Do not sandwich between layers of paint and/or sealants.