PVC and Vinyl Repair Kit - Clear

This great repair kit contains 3 tubes of specialist heavy-duty PVC Adhesive plus 3 commercial-grade vinyl patches 130mm x 80mm in size. This repair kit can be used for many different types of repairs, for example on bounce houses, waterslides, inflatable spas, air beds, hot tubs and many more. The Patches are made from a flame resistant high quality material which is rip proof and mould resistant. There are enough patches and adhesive for multiple repairs. Directions- 1. Exhaust the air from the inflatable product fully, clean the air leakage (damaged) area completely and remove all dirt. Sandpaper area if possible. 2. Take out the repair patch, pay attention that the patch should be a few centimetres larger than the damaged area. Cut rounded corners on the patch because sharp corners are more likely to catch and peel. 3. Apply a layer of PVC repair glue on the damaged area and the repair patch evenly. 4. While the glue is still wet apply the repair patch with the glue side to the damaged area,.Press firmly to ensure good contact. Ensure the patch is kept pressed onto the damaged area while the glue cures. (Use a weight if necessary). 5. Apply a little glue around the edges of repair patch after 12 hours (not always necessary). 6. The repair is complete after 24 hours. Now you can re-inflate the item.