Havendro Car Paintless Dent Removal Kits Slide Hammer with 18Pcs Dent Puller in Silver

Descriptions: For every person who should deal with Dents. The dent pullers can save work and lift easily. No need to wait for the car dent repair in the auto body repair shop, most of the dent removal can be finished in less time using. Efficient and safe to pop out dents, repair door ding on the metal surface, such as auto, motorcycle, refrigerator, washing machine, etc. No damage to the original paint. The T Bar Tool standard stainless steel are used depending on the design of a particular tool. They will don't hurt the auto surface, very sturdy and keep a long lifetime. Can be repaired against a variety of dents, dent repair lifter can also be adjusted, according to the size of the dent can be adjusted. How to use: 1) Clean the dent with a clean wet cloth; 2) Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3) Use a proper drawing gasket. Large dent requires a large drawing gasket. 4) Pull the trigger and apply the drawing gasket with extruded glue; 5) Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres; 6) Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7) Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8) Clean the repaired place with a clean wet cloth. | Havendro Car Paintless Dent Removal Kits Slide Hammer with 18Pcs Dent Puller in Silver